Top 10 typical forklift mishaps ， forklift operation must focus on these matters ！.

Don't ignore the forklift at the office. If the procedure is bad, there will be major crashes in mins, and there are several accidents including forklifts.

Case 1: The forklift freight blocked the vehicle driver's view, and the individual in front can not be found, leading to a moving mishap.
Situation 2: In order to maintain the balance of the forklift when lifting hefty products, the staff members used their body weight as the counterweight, which nearly created casualties.
Case 3: The width of the forklift cargo goes beyond the allowable width of the route and hangs on the roadside shelf, which nearly triggers an mishap.
Instance 4: Forklift is speeding and rolls over throughout a turn.
Instance 5: The forklift motorist did not observe the pedestrian, and the pedestrian did not see the forklift.
Situation 6: The forklift raises the employees illegally, the forklift vehicle driver does not wear the safety belt, the forklift lifter drops and the vehicle driver is crushed when the forklift surrender.
Case 7: The forklift vehicle driver did not wear a safety belt and fell from the car when it surrendered and was squashed.
Forklift procedure ought to focus on these matters ：.

Begin.
1. Prior to starting, observe the surroundings, and after validating that there are no obstacles that impede the safety of driving, honk the horn initially and after that start.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge need to be secure before starting.
3. When the forklift begins with a lots, the chauffeur ought to initially confirm that the tons is secure and trustworthy.
4. The begin has to be slow and steady.

Driving.
1. When driving, the height between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the pole ought to be tilted backward. .
2. Do not lift the fork too expensive when driving. When entering and leaving the work site or while driving, be careful that there will be no barriers overhead. When the tons is traveling, the fork should not be elevated expensive, which will certainly influence the security of the forklift. .
3. After discharging, the fork should be lowered to the normal driving position before driving. .
4. When transforming, if there are pedestrians or automobiles close by, the driving signal should be issued first. High-speed doglegs are banned. High-speed doglegs will trigger the vehicle to lose side security and topple. .
5. When the forklift is downhill, it is purely restricted to switch off the fire and slide, and it is prohibited to brake unexpectedly while driving with tons unless there are special scenarios.
6. When the forklift is running, it needs to comply with the web traffic rules in the factory and have to maintain a particular security distance from the car in front. .
7. When the forklift is running, the tons has to remain in the lowest placement that does not hinder the driving, and the gantry ought to be properly tilted back. The lots will not be elevated except when stacking or packing. .
8. The elevation of the lots must not block the vehicle driver's view. In unique scenarios, when the product affects the forward vision, drive at a low speed when reversing.
9. It is prohibited to switch on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it must drive securely at a reduced speed when entering the manufacturing workshop location. .
11. When the forklift is raised, lifted or driven, it is restricted for employees to depend on the fork to hold things and play a stabilizing function. .
12. If problems are located, they will certainly be repaired and reported in a prompt way, and they will never operate with diseases or conceal them.

loading and unloading.
1. When fork-loading items, the range in between the two forks ought to be adjusted as needed to make the tons of both forks balanced and not skewed, and one side of the item ought to be against the rack. .
2. It is prohibited to work with a solitary fork or utilize a fork top or pull. In special situations, safety and security indication have to be established to remind bordering pedestrians. .
3. In the process of filling and unloading things, the forklift should be braked with the brake. .
4. The rate of the vehicle must be slow and constant. Beware not to roll the wheels on the dunnage, so as not to extend the rolled items and injure people. .
5. When making use of a fork to fork the goods, the fork should be as deep as feasible under the load, and it ought to be kept in mind that the fork tip must not touch other items or objects. The tons needs to be supported with marginal back tilt of the gantry so that the tons does not glide backwards. The mast can be slanted forward somewhat when the tons is decreased to allow for simple positioning of the load and extraction of the forks. .
6. It is prohibited to fork items at broadband and collide with hard items with the fork head. .
7. When the forklift is functioning, it is restricted for people to stand around the fork, so regarding stay clear of the collapse of the goods and hurt people. .
8. Overwhelming is banned, and it is prohibited to use forks to lift workers to take part in high-altitude procedures to stay clear of high-altitude falling accidents. .
9. It is not allowed to utilize the brake inertia to slip, place, round or roll items. .
10. It is not permitted to make use of forks to select, transform pallet unload.

Leaving .
1. It is forbidden to leave the forklift when the products on the fork are in the air. Before leaving the forklift, you need to dump the goods or reduced the fork structure.
2. Draw the parking brake deal with to dead or depress the emergency brake switch.
3. The engine is switched off and the power is removed. (Except for special circumstances, such as the chauffeur does not leave the car's line of sight and does not exceed 1 minute).
4. Remove the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look ought to be inspected, and fuel, lubricating oil and air conditioning water need to be included.
2. Inspect the security performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are total and effective.
4. Throughout the operation of the forklift, examine whether the pressure and temperature are regular.
5. After the forklift is running, the exterior leak ought to also be examined and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You must examine prior to leaving the cars and truck;.
2. When you come across someone before you during driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the factory does Electric Forklift Truck for Warehouse not go beyond 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming must not be too sharp to stop the tendency of "free switching";.
6. Running up and down the incline ought to be slow-moving and uniform, and no turning on the slope is allowed.
7. Do not drive throughout the gradient. When the slope is above 10%, the automobile needs to be driven backwards when worsening;.
8. When the forklift employees lug the goods and progress, if they encounter big or hefty products and most likely to the chauffeur's view, they ought to take the turning around exercise
.
The "Eight Prohibitions" must be adhered to in the operation.
1. Solitary fork procedure is not enabled.
2. It is not permitted to lift the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel Electric Forklift Truck for Warehouse chemicals, flammables and various other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not enabled to make use of stopping force to exile round or easy-to-roll things.
7. It is not permitted to bring people to deal with the pallet or fork, and it is purely restricted to stand under the fork after the fork is raised.
8. Do not drive laterally on inclines
.
Parking is not permitted under the following conditions.
1. Contours, slim roadways, train crossings;.
2. Sections with a longitudinal slope higher than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the area with the very same length as the obstacle ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844